Effect of Si Addition on Structure and Corrosion Resistance of FeCoNiCr High-Entropy Alloy Coating | |
Li, Wenqiang1,2; Lian, Jie3; Wang, Dengfeng3; Zhang, Suo3; Han, Chengfu1; Du, Zhenyu1; Li, Fushan1 | |
2025-01 | |
发表期刊 | MATERIALS
![]() |
卷号 | 18期号:1 |
摘要 | In this study, Fe60Co10-xNi15Cr15Six (x = 0, 4, and 8) powders were successfully prepared using the aerosol method and employed to produce high-entropy coatings on Q235 steel via laser cladding. The microstructure and phase composition of the coatings were analyzed using scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction. Corrosion resistance and potential were evaluated through electrochemical analysis and Kelvin probe force microscopy. The results show that the Fe60Co10-xNi15Cr15Six coatings exhibit excellent metallurgical bonding with no visible porosity or cracks. The coating primarily consists of an FCC structure; however, as the Si content increases, the structure transitions to a mixed FCC + BCC phase. The addition of Si also refines the grain size in the alloy system. Electrochemical analysis reveals that the Si0 and Si4 coatings exhibit similar corrosion behavior, while the Si8 coating shows a significant drop in corrosion potential, reducing its corrosion resistance. As the Si content increases, grain refinement leads to more grain boundaries, but the corrosion resistance decreases due to the lower corrosion performance of Si compared to Co. Considering both cost and corrosion resistance, the Si4 coating offers a balance of low cost and excellent corrosion resistance. |
关键词 | laser cladding high-entropy alloy microstructure analysis corrosion resistance coating |
其他关键词 | MICROSTRUCTURE |
DOI | 10.3390/ma18010072 |
收录类别 | SCIE |
语种 | 英语 |
资助项目 | Doctoral Research Start-up Fund of Henan Open University; National Natural Science Foundation of China [52101203]; Education Department of Henan Province [23A430014]; Nuclear Material Technology Innovation Fund for National Defense Technology Industry [ICNM-2023-YZ-02]; [BSJH-2024-08] |
WOS研究方向 | Chemistry ; Materials Science ; Metallurgy & Metallurgical Engineering ; Physics |
WOS类目 | Chemistry, Physical ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering ; Physics, Applied ; Physics, Condensed Matter |
WOS记录号 | WOS:001393650800001 |
出版者 | MDPI |
原始文献类型 | Article |
EISSN | 1996-1944 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.library.ouchn.edu.cn/handle/39V7QQFX/174281 |
专题 | 国家开放大学 |
通讯作者 | Zhang, Suo; Li, Fushan |
作者单位 | 1.Zhengzhou Univ, Sch Mat Sci & Engn, Zhengzhou 450001, Peoples R China; 2.Henan Coal Sci Acad Wear Resistant Technol Co Ltd, Zhengzhou 450001, Peoples R China; 3.Henan Open Univ, Sch Mech & Elect Engn & Intelligent Mfg, Zhengzhou 450008, Peoples R China |
推荐引用方式 GB/T 7714 | Li, Wenqiang,Lian, Jie,Wang, Dengfeng,et al. Effect of Si Addition on Structure and Corrosion Resistance of FeCoNiCr High-Entropy Alloy Coating[J]. MATERIALS,2025,18(1). |
APA | Li, Wenqiang.,Lian, Jie.,Wang, Dengfeng.,Zhang, Suo.,Han, Chengfu.,...&Li, Fushan.(2025).Effect of Si Addition on Structure and Corrosion Resistance of FeCoNiCr High-Entropy Alloy Coating.MATERIALS,18(1). |
MLA | Li, Wenqiang,et al."Effect of Si Addition on Structure and Corrosion Resistance of FeCoNiCr High-Entropy Alloy Coating".MATERIALS 18.1(2025). |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论